Reverting Back to use RHSA Data
NOTE: This section is only for very specific situations where you absolutely must revert the matching system to use the RHSA data. This should not be done lightly. The newer CVE-based data is more accurate, specific, and provides a more consistent experience with other distros.
If your processing of anchore output relies on RHSA keys as vulnerability matches, or you have large RHSA-based whitelists that cannot be converted to CVE-based, then it is possible, though not recommended, to migrate your system back to using the RHSA-based feeds (centos:* groups).
Here is the process. It requires the Anchore CLI with access to the API as well as direct access to the internal policy engine API endpoint. That may require a docker exec or kubectl exec call
to achieve and will be deployment/environment specific.
Revert the distro mapping records that map centos, fedora, and rhel to use the RHEL vuln data.
- With API access to the policy engine directly (output omitted for brevity), remove the existing distro mappings to RHEL data. These are the used by Anchore:
curl -X DELETE -u admin:foobar http://localhost:8087/v1/distro_mappings?from_distro=centos curl -X DELETE -u admin:foobar http://localhost:8087/v1/distro_mappings?from_distro=rhel curl -X DELETE -u admin:foobar http://localhost:8087/v1/distro_mappings?from_distro=fedora- Continuing with API access to the policy engine directly, replace the removed mappings with new mappings to the centos feeds:
curl -H "Content-Type: application/json" -X POST -u admin:foobar -d'{"from_distro":"centos", "to_distro":"centos", "flavor":"RHEL"}' http://localhost:8087/v1/distro_mappings curl -H "Content-Type: application/json" -X POST -u admin:foobar -d'{"from_distro":"fedora", "to_distro":"centos", "flavor":"RHEL"}' http://localhost:8087/v1/distro_mappings curl -H "Content-Type: application/json" -X POST -u admin:foobar -d'{"from_distro":"rhel", "to_distro":"centos", "flavor":"RHEL"}' http://localhost:8087/v1/distro_mappingsNote: if something went wrong and you want to undo the progress you’ve made, just make the same set of calls as the last two steps in the same order but with the
to_distrovalues set to ‘rhel’.- Now, ensure you are back where you have access to the main Anchore API and the Anchore CLI installed. Disable the existing rhel feed groups
anchore-cli system feeds config vulnerabilities --disable --group rhel:5 anchore-cli system feeds config vulnerabilities --disable --group rhel:6 anchore-cli system feeds config vulnerabilities --disable --group rhel:7 anchore-cli system feeds config vulnerabilities --disable --group rhel:8anchore-cli system feeds delete vulnerabilities --group rhel:8 anchore-cli system feeds delete vulnerabilities --group rhel:7 anchore-cli system feeds delete vulnerabilities --group rhel:6 anchore-cli system feeds delete vulnerabilities --group rhel:5- Enable the centos feed groups that have the RHSA vulnerability data
anchore-cli system feeds config vulnerabilities --enable --group centos:8 anchore-cli system feeds config vulnerabilities --enable --group centos:7 anchore-cli system feeds config vulnerabilities --enable --group centos:6 anchore-cli system feeds config vulnerabilities --enable --group centos:5NOTE: if you already have centos data in your feeds (verify with
anchore-cli system feeds list) then you’ll need to delete the centos data groups as well to ensure a clean re-syncin the next steps. This is accomplished with:anchore-cli system feeds delete vulnerabilities --group centos:5 anchore-cli system feeds delete vulnerabilities --group centos:6 anchore-cli system feeds delete vulnerabilities --group centos:7 anchore-cli system feeds delete vulnerabilities --group centos:8- Now do a sync to re-match any images using rhel/centos to the RHSA data
[root@d64b49fe951c ~]# anchore-cli system feeds sync WARNING: This operation should not normally need to be performed except when the anchore-engine operator is certain that it is required - the operation will take a long time (hours) to complete, and there may be an impact on anchore-engine performance during the re-sync/flush. Really perform a manual feed data sync/flush? (y/N)y Feed Group Status Records Updated Sync Duration github github:composer success 0 0.28s github github:gem success 0 0.34s github github:java success 0 0.33s github github:npm success 0 0.23s github github:nuget success 0 0.23s github github:python success 0 0.29s nvdv2 nvdv2:cves success 0 60.59s vulnerabilities alpine:3.10 success 0 0.27s vulnerabilities alpine:3.11 success 0 0.31s vulnerabilities alpine:3.3 success 0 0.31s vulnerabilities alpine:3.4 success 0 0.25s vulnerabilities alpine:3.5 success 0 0.26s vulnerabilities alpine:3.6 success 0 0.25s vulnerabilities alpine:3.7 success 0 0.26s vulnerabilities alpine:3.8 success 0 0.35s vulnerabilities alpine:3.9 success 0 0.28s vulnerabilities amzn:2 success 0 0.26s vulnerabilities centos:7 success 1003 34.91s vulnerabilities centos:8 success 199 9.15s vulnerabilities debian:10 success 2 0.50s vulnerabilities debian:11 success 4 60.53s vulnerabilities debian:7 success 0 0.30s vulnerabilities debian:8 success 3 0.34s vulnerabilities debian:9 success 2 0.38s vulnerabilities debian:unstable success 4 0.39s vulnerabilities ol:5 success 0 0.31s vulnerabilities ol:6 success 0 0.29s vulnerabilities ol:7 success 0 0.41s vulnerabilities ol:8 success 0 0.28s vulnerabilities rhel:5 success 0 0.28s vulnerabilities rhel:6 success 0 0.43s vulnerabilities ubuntu:12.04 success 0 0.45s vulnerabilities ubuntu:12.10 success 0 0.25s vulnerabilities ubuntu:13.04 success 0 0.24s vulnerabilities ubuntu:14.04 success 0 0.37s vulnerabilities ubuntu:14.10 success 0 0.25s vulnerabilities ubuntu:15.04 success 0 0.42s vulnerabilities ubuntu:15.10 success 0 0.23s vulnerabilities ubuntu:16.04 success 0 0.35s vulnerabilities ubuntu:16.10 success 0 0.33s vulnerabilities ubuntu:17.04 success 0 0.33s vulnerabilities ubuntu:17.10 success 0 0.31s vulnerabilities ubuntu:18.04 success 0 0.42s vulnerabilities ubuntu:18.10 success 0 0.37s vulnerabilities ubuntu:19.04 success 0 0.45s vulnerabilities ubuntu:19.10 success 0 0.32s [root@d64b49fe951c ~]# anchore-cli image vuln centos os Vulnerability ID Package Severity Fix CVE Refs Vulnerability URL Type Feed Group Package Path RHSA-2020:0271 libarchive-3.3.2-7.el8 High 0:3.3.2-8.el8_1 CVE-2019-18408 https://access.redhat.com/errata/RHSA-2020:0271 rpm centos:8 pkgdb RHSA-2020:0273 sqlite-libs-3.26.0-3.el8 High 0:3.26.0-4.el8_1 CVE-2019-13734 https://access.redhat.com/errata/RHSA-2020:0273 rpm centos:8 pkgdb RHSA-2020:0575 systemd-239-18.el8_1.1 High 0:239-18.el8_1.4 https://access.redhat.com/errata/RHSA-2020:0575 rpm centos:8 pkgdb RHSA-2020:0575 systemd-libs-239-18.el8_1.1 High 0:239-18.el8_1.4 https://access.redhat.com/errata/RHSA-2020:0575 rpm centos:8 pkgdb RHSA-2020:0575 systemd-pam-239-18.el8_1.1 High 0:239-18.el8_1.4 https://access.redhat.com/errata/RHSA-2020:0575 rpm centos:8 pkgdb RHSA-2020:0575 systemd-udev-239-18.el8_1.1 High 0:239-18.el8_1.4 https://access.redhat.com/errata/RHSA-2020:0575 rpm centos:8 pkgdb
Note in the last command output that the OS vulnerabilities are again showing ‘RHSA’ matches. The restoration to RHSA-based vuln data is complete.
Feedback
Was this page helpful?
Glad to hear it! Please tell us how we can improve.
Sorry to hear that. Please tell us how we can improve.